Orion® Slim Heliovision® Fireplace
Collection: Orion Slim
The Orion® Slim delivers HELIOVISION™ virtual electric fireplace technology in a sleek, space-efficient profile that slides into a standard 2×6 wall or mounts directly to the wall. Featuring three flame styles across six colours, 15″ high viewing area, and independently adjustable ember bed and downlighting, it obsoletes higher-end gas fireplaces at a fraction of the complexity. Available in five sizes from 30″ to 100″ with wall mount bracket included. WiFi-controlled via the Modern Flames App.
Finish
Technical Specifications
Flame Technology: HELIOVISION™ Virtual Electric
Flame Styles: 3 (Hybrid, Gas, Wood)
Flame Colours: 6 (Yellow, Orange, Blue, Green, Purple, White)
Viewing Height: 15″ (381mm)
Unit Depth: 6″ (152mm)
Heater: 5,000 BTU, High Efficiency PTC Ceramic
Flame Speed: Adjustable (3 levels)
Crackling Sound: Adjustable (3 levels)
Ember Bed Colours: 10
Downlighting Colours: 10
Controls: WiFi App (iOS & Android), Handheld Remote, Built-in Touch Controls
Smart Home: Alexa & Google Home compatible
Extra Features: Heater Lockout Function, Wall Mount Bracket Included
Media: Black Reflective Glass + Western Driftwood Log Set
Install Types: Single-Sided Built-In (2×6 Wall Slide-In), Wall Mount
Sizes: 30″ (783mm) | 52″ (1330mm) | 60″ (1524mm) | 76″ (1947mm) | 100″ (2564mm)
Warranty
Fitting Instructions
Install types: Single-Sided Built-In (slide-in, 2×6 wall) and Wall Mount.
General requirements: Select a location at least 36″ (914mm) from combustible materials. A dedicated 10 Amp (AU/NZ) breaker is required.
Wall Recessed (Built-In): Measure appliance and create rough-in frame with electrical. Remove front glass. Hold unit up to confirm fit. Finished Opening Dimensions (W x H x D min.):
OR30-SLIM: 743 x 486 x 152mm | OR52-SLIM: 1289 x 486 x 152mm | OR60-SLIM: 1486 x 486 x 152mm
OR76-SLIM: 1908 x 486 x 152mm | OR100-SLIM: 2527 x 486 x 152mm
Wall Mount: Locate a minimum of 2 studs. Mount bracket with hooks facing upward and level. Use supplied wall anchors between studs. Two people required to lift and hang unit. Install side skirt panels after mounting.
Disclaimer: Always refer to the full product manual before installing.
Rating Information
Modern Flames electric fireplaces operate without combustion — no gas, no wood, no flue required. They run on standard 240V power and are safe to install using standard building materials without fireproof linings. PTC ceramic and coil heating components operate at a maximum of 2kW per hour. RGB LED lighting produces zero heat, enabling year-round use with or without the heater active. Modern Flames products are distributed in Australia by Modern Flames Australia, 18 Blue Rock Drive, Luscombe QLD 4207. Phone: (07) 5630 6840.
features_heading
Modern Flames electric fireplaces require minimal maintenance.
General care: Keep the glass clean with a soft, dry cloth. Do not use abrasive cleaners or harsh chemicals on the glass or surround. Ensure ventilation slots are kept clear and unobstructed at all times.
Media: Log sets and ember bed media can be repositioned as needed. Handle with care to avoid breakage. Replace media components only with manufacturer-approved parts.
Electrical: Do not attempt to service internal electrical components. Contact Modern Flames Australia for warranty or repair support. Always refer to the product manual before servicing.
- Share:
