Challenger Recessed Electric Fireplace
Collection: Challenger
The Challenger flush mount electric fireplace combines contemporary design with straightforward installation. Available in 50″ and 60″ sizes, it features 10 vibrant flame and ember bed colour options, 5 flame dimmer settings, thermostatic heat control with three output levels, and a 7.5-hour auto-off timer. Standard media includes glacier crystals. Controlled via the front panel touch screen or included remote. Installs into a 2×6 wall recess or mounts to the wall surface.
Finish
Technical Specifications
Flame Technology: LED Electric
Viewing: 45″ W x 12″ H (both sizes)
Unit Depth: 6″
Heater: 5,000 BTU
Heat Levels: 3
Flame Colours: 10 vibrant options (Orange, Emerald, Lavender, Multi, Magenta, Aqua, Gold, Red, Green, Royal Blue)
Flame Dimmer: 5 selective options
Timer: 7.5-hour auto off
Media: Glacier Crystals
Controls: Front Panel Touch Screen, Remote Control
Install Types: Built-In Recessed (2×6 Wall), Wall Mount
Sizes: 50″ | 60″
Warranty
Fitting Instructions
Install types: Built-In Recessed (2×6 wall), Wall Mount.
General requirements: A dedicated 10 Amp (or higher) breaker is required. Minimum 36″ (914mm) from combustible materials.
Recessed: Install into a finished opening in a 2×6 framed wall. The unit slides into the finished opening and mounts flush with the wall surface.
Wall Mount: Mount the included bracket to the wall with hooks facing upward. Secure to studs where possible. Two people required to lift and hang the unit.
Disclaimer: Always refer to the full product manual before installing.
Rating Information
Modern Flames electric fireplaces operate without combustion — no gas, no wood, no flue required. They run on standard 240V power and are safe to install using standard building materials without fireproof linings. PTC ceramic and coil heating components operate at a maximum of 2kW per hour. RGB LED lighting produces zero heat, enabling year-round use with or without the heater active. Modern Flames products are distributed in Australia by Modern Flames Australia, 18 Blue Rock Drive, Luscombe QLD 4207. Phone: (07) 5630 6840.
features_heading
Modern Flames electric fireplaces require minimal maintenance.
General care: Keep the glass clean with a soft, dry cloth. Do not use abrasive cleaners or harsh chemicals on the glass or surround. Ensure ventilation slots are kept clear and unobstructed at all times.
Media: Log sets and ember bed media can be repositioned as needed. Handle with care to avoid breakage. Replace media components only with manufacturer-approved parts.
Electrical: Do not attempt to service internal electrical components. Contact Modern Flames Australia for warranty or repair support. Always refer to the product manual before servicing.
- Share:
