Shieldit
The Enclosure Shielding System, otherwise known as Shieldit, is designed to be used with an inbuilt installation of our Open Fire Cookers to protect vulnerable non combustible enclosure materials (such as cement) from excessive heat, to reduce degradation.
By reducing the need to construct an internal shielding system from scratch, Shieldit helps to make inbuilt installations easier. It is especially simple when paired with a Fascia (sold separately), as it enables the Chef Open Fire Cooker’s to be slid into place after the enclosure construction is completed. Shieldit can also be utilised for Artist installations, however it is important to note that additional cladding will be required to cover the top front region of the firebox once the unit is in situ.
Clearances to combustibles are required to be compliant with AS2918 – the Australian Standard for safe installations.
Our dealer partners are trained and more than capable to work with you on creating your installation.
Attributes:
Easy assembly & installation
No modifications are required to the Open Fire Cooker for this accessory.
Specifically designed to suit each model
Options:
Mild steel, painted metallic black (industry standard)
Stainless steel, painted metallic black (minimal corrosion)
Finish
Technical Specifications
Easy assembly & installation
No modifications are required to the Open Fire Cooker for this accessory.
Specifically designed to suit each model
Warranty
Fitting Instructions
Installation must comply with AS/NZS 2918 (Domestic solid fuel burning appliances — Installation).
Download the Billy Smoker Open Fire Cookers Installation Guide:
https://www.billysmoker.com/s/BillySmoker-OpenFireCookersInstallationGuide.pdf
Architects and designers can download the CAD and Design Guide:
https://www.billysmoker.com/s/BILLY-SMOKER-ARCHITECTS-TRADIES-INSTALL-DESIGN-GUIDE_ED1.pdf
Rating Information
The Billy Smoker Open Fire Cookers range has been designed and engineered to meet the safe installation requirements stipulated in AS/NZS 2918 (Australian and New Zealand Standard for installation of solid fuel burning appliances). Defined as cooking appliances, the range complies with AS/NZS 4012 and AS/NZS 4013 (Australian and New Zealand Standards for emissions and efficiency). Meeting the Australian Environmental Protection Authority (EPA) requirements for air quality, these products can be installed throughout all of Australia (including New South Wales).
Use, maintenance and care
Billy Smoker units are built to last with the right care.
Mild Steel units: Painted metallic black (industry standard finish). For outdoor or exposed installations, a covered area is recommended. Re-season the firebox periodically by lighting a small fire to burn off surface moisture.
Stainless Steel units: Handles both covered and uncovered environments with minimal corrosion. Wipe down with a damp cloth after use. Avoid abrasive cleaners.
General: Remove ash regularly to maintain airflow and cooking performance. Check flue and spigot connections periodically. Keep the unit dry when not in use.
- Share:
